Transportation – Pairing Printer to Tablet
Prior to Pairing you will need to Factory Reset your tablet. Please follow these steps below:

Step # | Action | Image |
1 | Turn over printer and note the last four digits of the printer’s serial number. This number will be visible when you pair the printer to the tablet. | |
2 | Take tablet and open the Transportation app |
Step # | Action | Image | |
3 | With the Transportation app open select the Superman icon in upper RH corner | ||
4 | |||
5 | |||
6 | Find your printer by looking for in in the “Available Devices” section. The last four digits of the printer’s serial number will be part of the printer’s name. |
Step # | Action | Image |
7a | Please Select Device Information box will open. Using the Arrow drop downs allow you to select the correct Brand and Model | |
7b | Example of when Brand Box is open | |
7c | Example when correct Brand and Model# are chosen. Select Confirm | |
8 | Pairing Box will open. NOTE: Printer will acknowledge the pair. You do not have to accept anything on the printer. Select OK |
Step # | Action | Image |
9 | Paired printer will show up in Box under Paired Devices. Select Feed Paper to confirm communication between tablet and printer. 3” to 4” of paper will feed from the printer. | |
10 | Select Finish. Your printer is now paired to your tablet. Contact Transportation Support at (203) 401-6000 If you have any other questions. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article